| Label on the PCB | Part |
| IC1-IC8 | HA7210 |
| IC9-IC12 | DG411DJ |
| IC15 | ATmega8 |
| IC13 | DG403DJ |
| IC14 | 74HCT14 |
| K1-K8 | Pin row 2*5 pole, straight |
| CON2 | Pin row 2*10 pole, wound |
| R1-R8 | Resistor 10 Ohm 1/4W |
| R9 | Resistor 10 Kilo Ohm 1/4W |
| N1-N6 | Resistor network 10Kilo Ohm star-connection (5X-1-103) (4 resistors) |
| C1-C6 | Condenser 0,1 microfarad |
| D1-D4 | Diode BAT43 |
| D5-D8 | Diode 1N4148 |
| Q1-Q8 | Crystal 3.579MHz, 6.000MHz or other, as needed. |
| CON1 | Slot RJ45 |
| CON3 | Slot 3 pole, wound. |
| CON4A+B | Slot 2*6=12 pole, wound. |
The CON1 (RJ45) slot is used only for Nokia dbox2 and Sagem dbox2 for the purpose of leading the lines for one smartcard slot outside.
CON3, CON4A+B is used only for Philips dbox2 - forr the connector of the modem-stiftleiste. CON3, CON4A+B are soldered at the back side of the PCB:
